STAGE 2 PROCHARGER SYSTEMS FOR 2015 MUSTANGS, RELEASED!

Just released, Bolt on 230+ Horsepower!

If you are anywhere on the internet forums you obviously have heard the chatter about the amazing accomplishments ProCharger HO system have already had on these 2015 Mustangs. Accomplishments such as…

600rwhp on just 8psi from MAK performance
709rwhp from Blow By Racing!
703rwhp from Amazon Tuning Solutions. CLICK FOR VIDEO

However, even with those impressive power numbers from otherwise stock cars running the HO systems, we knew that wouldn’t be enough to satisfy the true power/boost junkies out there. So to make sure everyone is covered from 600 to 1,225+ HP we are proud to announce the release of the 2015 Mustang ProCharger Stage 2 system, which allows you to bolt on an additional 230+ HP to otherwise stock motors running 91 octane pump gas.

The first thing you will notice about this under hood shot of the ProCharger Stage 2 supercharger system is the 8 rib belt connected to the P-1SC-1 head unit. This belt is now driven off a dedicated crankshaft pulley, compared to the shared 6 rib drive of the HO system. This dedicated belt system is designed to support up to the 1,225HP+ F-1R headunit! With F-1A/F-1C/F-1R blowers already powering cars into the 7 second range in the 1/4 mile, its going to be wild to see what 2015 Mustang owners are going to accomplish this season.

(Shown in Satin Finish)

Now just because the word “racing” is being used, do NOT think this Stage 2 system is something that will have you trimming/drilling/cutting into your car. This system is not only very easily installed, is is also 100% reversible, same as the HO system. That’s right, even a kit that supports up to 1,225+ HP doesn’t require any permanent vehicle modifications. 

ProCharger knows that these systems will be used for high HP racing applications that dictate a rock-solid crank pulley design. Using a patented design, we are able to adapt a 8″ supercharger drive pulley onto the factory harmonic balancer, without having to drill or modify any factory parts. (balancers are already pinned from the factory). The ProCharger crank pulley works by using a system of “cam-locks” to securely grip the factory balancer, taking the load off the crank bolt, and ensuring years of service without worry.

Combining this 8″ crank pulley with a HD tensioner near the supercharger pulley, the system was designed for maximum belt wrap. Having a dedicated belt for the supercharger means less belt stretch. (AKA MORE tension and traction) Having a dedicated belt also gives the added bonus of being able to quickly remove the supercharger belt. After removing the supercharger belt all other functions of the car will remain the same, and still drivable.

Even with the best belt wrap possible the tensioner system still needs to be up to the task of holding drive power without slippage. ProCharger’s tensioner is unique in design in that its not only spring loaded, but also allows the customer to add as much pre-load adjustment as they want into the belt. This tensioner has already been proven to support high HP racing applications with dedicated 8 rib belts, ensuring a solid grip for those with elevated boost and power levels. 

You can also change the pulley and 8-rib belt without removing the bracket or the supercharger. Making for quick and easy boost changes at the track or in your garage.

ProCharger’s massive 2015 Mustang Air-to-Air intercoolers make a huge visual statement, and have the performance to back it up. 

The 2015 Mustang HO intercooler has already been tested to support over 800HP due to its highly effective 630 cubic inch core. While the Stage 2 intercooler increases its cooling core size by a mind blowing 75%, while still fitting behind the factory bumper without cutting/drilling/trimming any factory parts. (Yes, HO Systems can be upgraded to Stage 2 Intercoolers at time of purchase)

For those of you that are the “DIY type” doing installations in your home garage. The ProCharger Stage 2 system comes with a handheld programmer from Diablosport with a supplied ECU tune for the supercharger. ProCharger has spent countless hours on the Dyno/Street to not only deliver you a high horsepower tune, but also making sure to retain reliability. With long-term reliability in mind, these tunes are set up from ProCharger to account for fuel variations across the country. Custom tuning may result in more power, however is not required.

OK, so we know that we threw a lot of information out there about this new system, now let’s take a moment and break down the differences from the HO and Stage 2 systems for these 2015 Mustangs. 

HO SYS: 8 psi Boost, HO Intercooler, Shared Drive, 45-50%+ power gain
STG 2 SYS: 9 psi Boost, Stg 2 Intercooler, Dedicated Drive, 55%+ power gain

The HO system can be upgraded to Stage 2 intercooler.
Both systems can be upgraded to the “Red” ProCharger racing bypass valve.

http://www.procharger.com/2015mustang.shtml

ProCharger is located in Kansas City, where all systems are 100% imagined, designed, and produced right here in the U.S.A. We look forward to earning your business, and adding you to the ever-growing ProCharger Family! 

Happy Boosting,
ProCharger

View Similar
Articles

SIGN-UP FOR THE LATEST PROCHARGER NEWS

* indicates required

EMISSIONS COMPLIANCE

ProCharger offers Executive Orders for Emissions Compliance (EO) from California Air Resources Board (CARB) for many of our most popular car, truck and SUV applications. If you live in California, we can only sell you products with EO certification. Check out our full list of EO offerings.