2
Dodge Charger 2005-2010 H.O. System Installation
Stock Component Removal
Engine Air Filter
1
Disconnect the battery ground.
2
Remove the Engine Cover(s).
3
Remove the IAT (Intake Air Temperature)
Sensor.
4
Remove the PCV Tube from the intake
manifold.
5
Remove the Engine Air Filter Assembly
bolt with a 10mm socket.
6
Loosen the band clamp from the Air Filter
housing to throttle body connection with
an 8mm nut driver.
7
Remove the entire Air Filter Assembly
from the vehicle.
8
Remove the radiator cavity covers (2x) by
pulling up and toward the center of the
vehicle.
Tech Tip:
If your vehicle is equipped with
an air silencer for your intake system,
this must be removed for kit installation.
Simply remove the single 10mm bolt and
remove this assembly.
Engine Air Filter Removed
Radiator Cavity Covers Removed
a,b,i,ii,1 3,4,5,6,7,8,9,10,11,12,...48