38
Dodge Charger 2005-2010 H.O. System Installation
Finishing
Air Inlet
1
Drill a 1/2” hole into the rubber inlet
elbow. Refer to the image on the right
for proper placement. For reference, with
the filter, tube, and elbow placed onto
the inlet of the blower, the hole should be
drilled on the bottom of the rubber elbow,
centered.
2
Insert the supplied plastic 90
°
barbed
fitting into the drilled hole.
3
Install the rubber elbow onto the blower,
followed by the inlet tube, and finally
the filter. Be sure to rotate this assembly
toward the engine cover to ensure proper
clearance from the hood liner.
4
Tighten the connections using the
supplied hose clamps.
Plastic Fitting Location
Air Inlet Installed
a...,28,29,30,31,32,33,34,35,36,37 39,40,41,42,43,44,45,46,47,...48