Dodge Charger 2005-2010 H.O. System Installation
21
Power Steering Cooler
Power Steering Cooler Relocation
(6.1L SRT8 Models)
1
Remove the factory bracket located on the
lower driver’s side of the radiator with a
10mm socket (see image on right).
2
Disconnect the line on the passenger’s
side of the cooler.
3
Rotate the cooler vertically and zip tie
the top and bottom of the cooler to the
radiator end (see image on right).
4
Use the supplied 3/8” x 3/8” barb
connector to connect the 24” long
section of 3/8” hose to the passenger’s
side power steering cooler. Secure the
connections with #6 hose clamps.
5
Route the line behind the intercooler.
6
Slide the 4” section of 3/8” hose to the
open connection on the power steering
cooler. Slide the provided 90
°
3/8” barbed
fitting onto the hose section, and connect
the opposite end to the hose routed in
step 5. Secure each connection with #6
hose clamps.
P
ower
S
teering
C
ooler
Bracket
Remove Factory Bracket
Lower Zip Tie
Upper Zip Tie and Hose Connection
Hose Connections (Pass. Side)
a...,11,12,13,14,15,16,17,18,19,20 22,23,24,25,26,27,28,29,30,31,...48