16
Dodge Charger 2005-2010 H.O. System Installation
Serpentine Belt
S
erpentine
B
elt
1
Re-install the factory tensioner with the
pulley aimed straight down and tighten
the 15mm bolt.
2
Install the serpentine belt as shown below.
3
Tension the serpentine belt by adjusting
the idler pulley adjustment screw using a
5/16” hex bit.
4
Using a 5/8” wrench, tighten the bolt at
the front of the pulley to lock the idler
pulley in place.
Serpentine Belt Installed
Idler Pulley Adj.
Screw
Idler Pulley Bolt
Serpentine Belt Path
a...,6,7,8,9,10,11,12,13,14,15 17,18,19,20,21,22,23,24,25,26,...48