2015-16 Corvette C7 Z06 (LT4) Street Kits

2015-16 Corvette C7 Z06 ProCharger Supercharger System

825+ HP from a factory LT-4 with no other mods!

ProCharger was the first supercharger manufacturer to design and release an air-to-air intercooled supercharger system for the C7 Corvette Stingray, but we didn’t stop there. ProCharger now has a robust centrifugal supercharger kit offering for Chevrolet’s ultimate supercar–the 2019-2015 C7 Z06 Corvette. By replacing the Z06’s LT4 factory roots-style supercharger with a direct-replacement sheet metal intake manifold and centrifugal supercharger head unit, all while still fitting comfortably under the factory hood on both the LT1 and LT4 Corvette engines, a ProCharger dramatically increases the horsepower and torque output.

GM laid the foundation for big power with the C7 Z06 LT4 engine's forged internals, relatively low compression, and factory-supercharger system, and now with the addition of a ProCharger supercharger you can bolt-on an extra 115+ HP over stock with an intercooled D-1SC head unit at the 10 psi factory boost level and pump gas, with no permanent modifications to the vehicle. At 13 psi, while still running pump gas and factory timing, 825 HP is at your fingertips.  For those that are really looking to have a spot on the map of big horsepower, check out our Race kits page. 


Street Tuner Kits for Z06

DescriptionHp GainMax BoostIntercoolerPart #
  HO Tuner Kit with D-1SC supercharger  specify  specify  Air to Air  1GU204-SCI

For Race Kits Click Here 

Tuner Kits: These kits make sense for someone wanting to perform custom tuning of the car and push the envelope in performance.  Will most likely be experimenting with alternative fuels such as 93 octane, race fuel, E85 fuel, and methanol supplemental fuel.  In addition, possibly changing engine components like heads, headers, exhaust, and camshaft.

1200 Crank HP with stock bottom end and exhaust!

Check out this Engine Power episode where they ProCharged a Z06 and made over 1,200 Crank HP! How cool is that?


Vette Magazine Bolts on 140hp onto a Stock Z06 in 6 hours! 


As Seen in Vette
Click here to see Vette magazine's ProCharger supercharger kit install article


 

2019-2015 Corvette C7 Z06 (LT4) Features:

Our 2019-2015 Corvette C7 Z06 High Output Intercooled Tuner Kits with D-1SC were engineered for a 115+ horsepower gain over stock on 10 psi of boost and pump gas. Higher boost levels and horsepower gains of 825 HP are possible on 13 psi, and even higher for custom racing builds equipped with a ProCharger F-Series supercharger model up to the 10.5” volute (F-1X and F-2), all without the need for additional brackets.

2015 Corvette C7 Z06 ProCharger Supercharger System

Intake Manifold

ProCharger designed and built a custom LT4 sheet metal intake manifold to replace the factory roots supercharger. This intake manifold is a direct replacement for the factory manifold–you simply unbolt the factory blower and drop the new intake in its place. This intake features CNC billet intake runners and base plates, as well as thick-wall sheet metal built to withstand high amounts of boost. We set out to not only optimize flow and power potential, but also ensure the factory hood line was maintained. This robust manifold is also compatible with LT1-equipped C7 Stingray Corvettes.

Blower Options

From mild to wild, ProCharger has a supercharger head unit ready to support whatever power level you desire. The base system comes with the super-efficient D-1SC supercharger, capable of 800+ RWHP (925 HP), and race systems are available up to the F-2 unit which can support 1,600 HP. Each ProCharger supercharger model features our patented self-contained design with its own internal oiling system, and is built out of aircraft grade billet aluminum for the ultimate in reliability.

Air-to-Air Intercooler

ProCharger performed rigorous testing to design the ultimate air-to-air intercooler for the C7 Corvette platform, including road course, drag strip, street traffic, and in-lab testing. By putting our intercooler systems through its paces we were able to ensure the coolest charge air temperature and safe engine operating temperature, all while leaving the C7’s factory-engineered aerodynamics in place. See our C7 intercooler system blog for more information about design and testing.

2015 C7 Z06 Corvette Intercooler

Reversibility

The installation of our C7 and C7 Z06 HO Intercooled Systems is 100% reversible, with no permanent modifications needed to the vehicle. The factory supercharger and supporting components/hardware are easily unbolted and removed and can be reinstalled just as easily. From our bolt-in intake manifold, blower bracket, to the air-to-air intercooler system, everything is 100% plug-and-play. No cutting, bending, tweaking, or trimming of any kind is needed.


System Options

These ProCharger systems also give Corvette owners multiple options in both the performance and appearance arenas, with your choice of a supercharger air inlet with race-style filter or a factory air box interface, and either polished, satin, or black finish for the brackets and head unit.

Head Units:
- D-1SC through F-2

Head Unit and Bracket Finishes:
- Satin
- Texture Black
- Polished

Intake Manifold and Top Plate/Cover Finishes:
- Unfinished
- Texture Black

Bypass Valves:
- Bullet ProFlow
- Race Valve (open or closed)


Powertrain Warranty Available from 

A supplemental powertain warranty is available from Charter Warranty for those seeking additional protection ($7,500 total protection).  

NOTE: Vehicles must be less than 3 years old and 36,000 miles to be eligible for the warranty.  Click here for more details.


Pricing

Tuner Kits start at $8,298

Click HERE to view our Application and Specifications Price Guide. Click to call our sales staff or email us if you need any help. We will be happy to assist you with any questions you may have. For up-to-date news, make sure to sign-up for our email newsletter HERE
 
Mon - Fri 8am - 5:30pm CST
Phone - (913) 338-2886
Sales Email - sales@procharger.com
 

Find a Dealer Near You

Looking to make a purchase or a shop to install? We have a large group of dealers ready to serve you with your ProCharger needs. Click below to find a dealer near you!

Dealer Locator


Speak with an Expert

Have questions? We've got a team of ProCharger experts ready to help you. Give them a call during our normal business hours Mon - Fri 8am - 5:30pm CST. 

Call Us Now


CALIFORNIA EMISSIONS NON-COMPLIANCE INFO (CARB)

NOTE: Click here for a full list of California and 50 state street legal systems.


Download install manual